Products art

CI5X Series Impact Crushers

CI5X series impact crusher is a new generation of coarse and medium crushed products designed to meet customers needs for high profit, low cost, energy saving and consumption reduction. It is the guarantee for large-volume production line c

Mining, metallurgy, construction, chemical, cement, refractory material, etc.

Parameter


Model Specifications (mm) Feed opening (mm) Max. feed size (mm) Capacity (t/h) Power (kW) Weight (t) Dimensions (mm)
CI5X1315 Φ1300×1500 1540×930 600 250-350 250 20 2880×2755×2560
CI5X1520 Φ1500×2000 2040×520 (2040×995) 350(700) 400-600 2×250 (2×200) 30 3390×3520×2790
CI5X1415 Φ1400×1500 1540×1320 900 350-550 250 24 2995×2790×3090
CI5X1620 Φ1600×2000 2040×1630 1100 500-900 2×200 42 3485×3605×3720
CI5X2023 Φ2000×2300 2400×1920 1300 1200-2000 2×500 76 4890×4380×4765
  • Slag - Wikipedia

    2019-10-2  Slag run-off from one of the open hearth furnaces of a steel mill, Republic Steel, Youngstown, Ohio, November 1941.Slag is drawn off the furnace just before the molten steel is poured into ladles for ingotting.

  • Slag-metal Separation in the Blast Furnace Trough

    It is important to reduce metal losses associated with the slag in the blast furnace runner. Insufficient separation gives rise to technological problems in the subsequent processing of hot metal and slag in addition to the losses themselves.

  • Slag-metal Separation in the Blast Furnace Trough_文库下载

    blast furnace trough physlcal modellng metal loss In 1. Introduction Figure slag separation process in the blast furnace. Molten iron and slag, driven by the internal pressure of the furnace, are tapped from the blast furnace hearth through a I showsthe general

  • Types of iron and steel slag : NIPPON SLAG

    2011-9-8  Blast furnace slag is recovered by melting separation from blast furnaces that produce molten pig iron. It consists of non-ferrous components contained in the iron ore together with limestone as an auxiliary materials and ash from coke. Approximately 290 kg of slag is generated for each ton of pig iron.

  • Reclamation of Induction Furnace Slag by Separation

    Table - 1 Production of Slag No. of heat Weight of CI (kg) Slag produced (kg) 1 650 12.5 12 per day 7800 144.6 312 per month 16900 3133 3744 per year 202800 37596 Induction furnace slag contain metal due to 1) Smelting i.e process in which slag forms a layer above molten metal so that some particles in molten metal stuck to the slag.

  • Separation of Metals from a Slag Using a Multi-cell Jig

    2013-12-24  Vol.2, No.2 Separation of Metals from a Slag Using a Multi -cell Jig 139 vertically induced staged cleaning action enhances fine particle density separations. The design of the high-capacity multi-cell machine reduces both floor space requirements and ... With metal from slag, it is easy to obtain a high-grade product at the expense of

  • Slag/Metal Separation from H 2 -Reduced High

    Cited by: 1
  • Separation Metal Droplets trom Slag Penny IWAMASA

    properties of the slag to promote better separation be-tween the slag and metal phases. This is donewith var-ious slag conditioners that are either injected with the desulfurizing reagent or addedto the slag whendesul-furization is cornpleted andbefore the slag is skimmed.3) Theseslag conditioners mayinclude oneof the following: fluorspar ...

  • Slag/Metal Separation from H2-Reduced High

    slag/metal separation was carried out in an induction furnace at 1873 K. After separation, metal block and slag were obtained, and most of gangue minerals combined with lime and calcium fluoride formed the slag, but some impurities remained in the form of slag inclusions in the metal. Based on the SEM-EDS

  • (PDF) LABORATORY STUDY OF SLAG METAL

    LABORATORY STUDY OF SLAG METAL SEPARATION FOR HC FEMN ... some metal droplets may remain trapped in the tap slag from the furnace, causing a

  • metal separation furnace slag - Mining

    2013-3-17  Metal technical and business papers and mill process modeling. Blast Furnace Slag. are recovered by magnetic separation and recycled with the furnace charge. in the BOF slag reverts to the hot metal in the blast furnace. »More detailed

  • The Influence of SiO2 on the Extraction of Ti Element from Ti ...

    2013-8-8  The Influence of SiO2 on the Extraction of Ti Element from Ti-bearing Blast Furnace Slag_化学_自然科学_专业资料 146人阅读3次下载 The Influence of SiO2 on the Extraction of Ti Element from Ti-bearing Blast Furnace Slag_化学_自然科学_专业资料。

  • Unit3 The Blast Furnace Plant_图文_百度文库

    2018-9-5  The iron and slag runner systems are also refractory-lined trenches. ? The molten iron is delivered to a series of refractorylined hot metal cars for transportation to the steel plant. The molten slag usually goes directly to slag pits adjacent to the casthouse, where it

  • US4444378A - Apparatus for separating slag from a

    US4444378A US06/407,035 US40703582A US4444378A US 4444378 A US4444378 A US 4444378A US 40703582 A US40703582 A US 40703582A US 4444378 A US4444378 A US 4444378A Authority US United States Prior art keywords trough molten metal apparatus slag receiver Prior art date 1982-08-11 Legal status (The legal status is an assumption and is not a legal conclusion.

  • Types of iron and steel slag : NIPPON SLAG

    2011-9-8  Blast furnace slag is recovered by melting separation from blast furnaces that produce molten pig iron. It consists of non-ferrous components contained in the iron ore together with limestone as an auxiliary materials and ash from coke. Approximately 290 kg of slag is generated for each ton of pig iron.

  • High Alumina Slag and Blast Furnace Operation –

    High Alumina Slag and Blast Furnace Operation. Blast furnace (BF) process of iron making is a process where liquid iron (hot metal) and liquid slag are produced by the reduction of iron bearing materials (sinter and/or pellet and lump ore) with coke and by fluxing of the gangue material of the feed materials.

  • Preparation of Titanium-rich Raw Material from Titanium ...

    high titanium blast furnace slag in Panzhihua,the other main impurity components in titanium-bearing blast furnace slag were removed to make titanium-rich raw material for industrial use by low temperature chemical separation and extraction method.The ...

  • Effective Utilization of Induction Furnace Slag by ...

    2015-5-21  Effective Utilization of Induction Furnace Slag by Extraction of Metal using Crushing System 1M. V. Deshmukh, 2Dr. A. G. Matani 1PG Scholar, 2Associate Professor 1Mechanical Engineering Department, 1 Government College of Engineering, Amravati – 444 604 [M.S.] India,

  • Selective Precipitation and Separation of Fe Components ...

    By modification of Molten copper smelting slag,the dispersed Fe components in various mineral phases were selectively enriched into the magnetite phase,and the magnetite phase could be selectively precipitated and grew.Thus,the magnetic phase can be ...

  • Utilization of nickel slag using selective reduction ...

    2013-12-3  magnetic separation. 3 Results and discussion 3.1 Effect of basicity on selective reduction−magnetic separation The effects of basicity (mass ratio of CaO to SiO2 in the mixture of nickel slag, additive and calcite) on the metal grade and the metal recovery from the nickel slag

  • Open Repository of National Natural Science Foundation of ...

    2016-12-8  Study on the formation of Ti(C,N) between blast furnace hot metal and slag bearing high TiO2

  • slag-metal reaction中文_slag-metal reaction是什么意思_翻译 ...

    "slag free metal"中文翻译 无渣金属 "slag metal interface"中文翻译 渣金属界面 "slag metal separation"中文翻译 渣金属分离 "slag metal surface"中文翻译 渣金属分界面 "gas-metal reaction"中文翻译 气一金反应 "heavy metal reaction"中文翻译 重金属

  • (PDF) Nickel recovery from electric arc furnace slag by ...

    Nickel recovery from electric arc furnace slag by magnetic separation. ... A scheme of two-stage metal reduction from the dump slags using the reduction- melting scheme is developed and tested ...

  • Metal Recovery from Steelmaking Slag

    2018-3-26  Metal Recovery from Steelmaking Slag Qi Yu Master of Applied Science Materials Science and Engineering University of Toronto 2018 Abstract An experimental study was carried out to recover metal values from a steelmaking slag through air oxidation and magnetic separation. The oxidation of slag was carried out in both solid and

  • LABORATORY STUDY OF SLAG METAL SEPARATION FOR

    2015-6-15  metal and slag, and that this is the result of the poor slag-metal separation. 3 EXPERIMENTAL Experiments were designed based on the gathered material, and the aim was to identify if there are any methods to enhance slag ‬ metal separation, if such a situation is to occur again. A list of the experiments is given in Table 16.

  • NICKEL RECOVERY FROM ELECTRIC ARC FURNACE SLAG

    2018-1-11  J o u r n a l o f Journal of Mining and Metallurgy, 53 A (1) (2017) 3 - 15 #Corresponding author: [email protected] NICKEL RECOVERY FROM ELECTRIC ARC FURNACE SLAG BY MAGNETIC SEPARATION

  • The method of separation of metal and slag

    The METHOD of SEPARATION of METAL AND SLAG, including discharge of metal from the furnace through the exhaust hole and the slag tapping, filing during the whole time discharge gas under pressure countercurrent metal stream, wherein the gas is fed with a constant pressure, a large pressure hydrostatic Stavka metal and slag flow, providing ...

  • Effects of smelting parameters on the slag/metal ...

    Abstract. Smelting separations of Hongge vanadium-bearing titanomagnetite metallized pellets (HVTMP) prepared by gas-based direct reduction were investigated, and the effects of smelting parameters on the slag/metal separation behaviors were analyzed.

  • Melting and separation behavior of slag and metal

    Melting and separation process of metallization pellet could be divided into three stages — slag and metal were sequentially melt and gathered, slag leaked through the sample while metallization pellet shrunk, and finally the slag and metal phase separated from each other completely. •

  • Silver Froth (Parkes Dross) Distillation to separate ...

    The lead separation by cupellation firstly oxides lead which has to be reduced to lead bullion before it returns to fire-refining process. Oxidation and reduction of lead, inevitably, requires more energy consumption and results in more metal loss, not to mention the terrible working environment.

  • slag MID RIVER MINERALS

    2018-6-24  SLAG is a broad term covering all non metallic co products resulting from the separation of a metal from its ore, Its chemistry and morphology depends on the metal being produced and the solidification process used. Slags can be broadly categorized as ferrous (iron/steel) and non-ferrous (copper, lead/zinc) depending on the industry from which ...

  • Recycling of steelmaking slag fines by weak magnetic ...

    Using the technology of weak magnetic separation coupled with selective particle size screening, steelmaking slag fines can be effectively separated to produce cleaner iron-rich products with sufficiently high iron contents and low levels of impurities to be reused.

  • Technical solutions to the problem of separating

    Technical solutions to the problem of separating furnace slag from steel and subjecting the slag to its initial processing ... It was found that the methods proposed by TECHCOM ensure complete separation of the slag from the steel. ... Method of Discharging Most of the Liquid Metal from a Refining Furnace Through a Taphole in the Bottom of the ...

  • blastfurnace slag 在 环境科学与资源利用 分类中 的翻译结果 ...

    A TEST OF TITANIA SEPARATION FROM HIGH TITANIA BEARING BLAST FURNACE SLAG 高钛型高炉渣的渣钛分离试验 短句来源 Development of study on comprehensive utilization of titanium-bearing blast furnace slag 含钛高炉渣综合利用研究的

  • Refractory Slag Iron Separation Agent/ Slag Remover

    The slag separation agent/ slag remover developed by Huaxi Furnace Refractory Co., Ltd., is a syrupy liquid which made of alumina powder, corundum powder, SiC powder and special agent, and has such characteristics as no smelling, no harm, good slag and oxidation

  • metal separation plant from steel slag - Mining

  • : 4.6/5
  • iron seperation from electric arc furnace slag

    Blast furnace slag is recovered by melting separation from blast furnaces that produce molten pig iron. Steelmaking slag consists of converter slag that is generated by converter and electric arc furnace slag that is generated during the electric arc furnace steelmaking process that uses steel-scrap as the raw material. Electric arc

  • 6 Steel Industry Separation Technologies for the ...

    2019-9-23  The U.S. steel industry produces about 100 million tons annually. In 1994, this constituted 12.6 percent of world production. In addition, the United States imports about 25 million tons of steel each year. The value of U.S. steel production is approximately $50 billion per year, and the industry ...

  • A Study on Selected Hot-Metal and Slag Components for ...

    2005-3-17  metal droplets and liquid slag drips down via the dead man and are collected in the hearth. The slag with its lower density stay on top of the denser hot metal, so when the furnace tap hole opens, the hot metal will flow out first, and when the level inside the furnace has decreased, the slag will come.

  • Common Uses for Slag National Slag Association

    2019-10-7  Slag's ain't Slag's. SLAG is a broad term covering all non metallic co products resulting from the separation of a metal from its ore, Its chemistry and morphology depends on the metal being produced and the solidification process used.


  • INQUIRY

    When we get your inquiries, we will send tailored catalogue, pricelist, delivery, payment terms and other required details to you by email within 24 hours.

    * *

    The materials of processing: *

    • Granite
    • Limestone
    • Basalt
    • Pebble
    • Gravel
    • Gypsum
    • Marble
    • Barite
    • Quartz
    • Dolomite
    • Gold Ore
    • Copper ore
    * *